Bridge Hangers
1-800-USA-DUCT

MC-6000 (Base) and MC-6000 (Base Anchor)*


6" IPS Fiberglass or PVC Duct (6.625" O.D.)
For 6" Tubular Fiberglass Duct (6.18" O.D.) use MC-5900. Consult factory for details.

These assemblies mount on top of bridge members and support 6" duct. The table below gives the necessary data for specifying 1 to 24 ducts in any horizontal or vertical row arrangements. MC-6000 Base Anchor has extra cross member(s) for added strength in bracing larger support systems. Larger support systems on request.

FIBERGLASS PLATE 1/2" X 2" Part ABridge Hangers
FIBERGLASS SQUARE TUBING 2" X 2" Part B
Bridge Hangers


Part (A) '/2" x 2" fiberglass plate.

Part (B) 2" x 2" fiberglass square tubing.

Part (C) 3/4" 10NC threaded steel hanger rods. nuts and washers (HDG).

Part (D) Intermediate rods: 3/4" 10NC threaded steel rods, nuts and washers (HDG).

Part (E) 3/4" fiberglass spacer tubes (1.0" O.D. x .755 I.D. x 6.375" long).

*Specify length - standard length extends 18" above support.

+When using fiberglass duct, spacer tubes will be 6.375".

Standard hangers are equipped with zinc plated hardware. Galvanized and stainless steel hardware is also available.

Standard hangers are made with fiberglass components. PVC hangers with galvanized square tubing and aluminum hangers are available.

Bridge Hangers

MC 6000 Base