Bridge Hangers

Bridge Hangers
Bridge Hangers

MC-6000 (Intermediate) and MC-6000 (Anchor)*


6" IPS Fiberglass or PVC Duct (6.625" O.D.)
* For 6" Tubular Fiberglass Duct (6.18" O.D.) use MC-5900. Consult factory for details.


Part (A) 1/2" x 2" fiberglass plate.

Part (B) 2" x 2" fiberglass square tubing.

Part (C)* 3/4" 10NC threaded steel hanger rods, nuts and washers (HDG).

Part (D) Intermediate rods: 3/4" 10NC threaded steel rods, nuts and washers (HDG).

Part (E) 3/4" fiberglass spacer tubes (1.0" O.D. x .755 I.D. x 6.76" long).

*Specify length - standard length extends 18" above support.

+When using fiberglass duct, spacer tubes will be 6.375".

Standard Hangers are equipped with zinc plated hardware.  Galvanized and stainless steel hardware is also available.

Standard hangers are made with fiberglass components.  PVC hangers with galvanized square tubing and aluminum hangers are available.

These assemblies are engineered to support 6" fiberglass or PVC duct hanger support systems from inserts in the bridge deck. The table below gives pertinent data on number of parts required, dimensions and weights for 1 to 24 duct structures in horizontal or vertical row arrangements. MC-6000 Anchor with additional cross members for added strength in bracing large systems is also included. Larger support systems on request.

FIBERGLASS PLATE 1/2" X 2" Part A
Bridge HangersFIBERGLASS SQUARE TUBING 2" X 2" Part B
Bridge Hangers

MC6000 Intermediate